SERVICES
FIRE BARRIER & REMOVAL
MONOKOTE
Monokote® Z-3306 Thermal Barrier is a cementitious fire protective coating specifically formulated for application over rigid, urethane and polystyrene foam plastics. Spray applied to interior foam surfaces on walls and ceilings, Z-3306 forms a hard, durable, monolithic thermal barrier against heat and fire.
Z-3306 is a mill-mixed product requiring only the addition of water. It can be easily applied to required thickness in a single pass resulting in an efficient, low cost method of meeting building code and insurance requirements.
BENEFITS
While specific requirements differ from locality to locality, the use of foam plastics for most building occupancies is permitted only when they are protected by an approved thermal barrier. Z-3306 has been successfully fire-tested and listed by Underwriters Laboratories Inc. and Factory Mutual. Z-3306 has a proven field and laboratory record of performance, reliability, ease of application and low in-place cost.
REMOVAL
Maritime Insulators’ removal process of blown-in insulation is achieved using a large vacuum system. The vacuum is inside a box truck with a 200 foot hose attached. This hose is brought inside the area containing the insulation to be removed. The insulation is sucked up by the hose and deposited into a large bag in the back of the box truck. With respect to fiberglass batt insulation, this removal is completed by the crew entering the area and simply bagging the insulation for removal by hand. The removed batt insulation is then taken to the back of the box truck. All removed insulation is properly disposed of at a landfill site.
