Talk Now Text Now

Service Areas

Retro-Fits Information


Retro Fit Insulation Option For Existing Homes

Checking your home's insulation system is one of the fastest and most cost-efficient ways to reduce energy waste and maximize your energy dollars. Most homes built before 1975 were not well insulated.

Home improvements that will save energy and money
Retro-Fit Option
Attics

How it’s Done:
Most attics are half day jobs with two guys. Our blowers are mounted in the back of larger trucks. We bring a hose in through your house and into the attic. Keep in mind that the entry door must do left open for the hose to fit through while we are insulating your attic. We will install rafter venting if needed and insulate and weather strip the hatch. After finished blowing in the attic we will replace the hatch and clean up the mess. There may be some traces of dust left behind. We do our best to get your place clean

We Also Do Roof Slopes Crawl Spaces Flat Roofs
Walls Blown In

How It’s Done:
Most wall jobs are one to two days with three guys. Our machines are truck mounted and blow insulation in with enough force that the insulation will not settle over time. We guarantee it. Our machines have their own power, but we will need some additional power from you to run our drills. We start by removing shingles or siding, then we drill holes in each cavity. We drill multiple holes in the corner of the house to insure we insulate where there is cross bracing. We also have inferred cameras to find the cross bracing. After filling the cavity with insulation we foam the hole and replace the shingle or siding.

We Also Do Vinyl Metal Clap Board Drill 1 Inch Holes On The Inside of The Home
Inslulating Inside The House
We Also Do Garage Ceiling Flat Ceiling Interior Walls and Ceiling For Sound Proofing
Walls Spray Foamed

How It’s Done:
Average jobs are one day, two guys. All our foam equipment is in a three ton box truck and is run by a John Deere generator. We run our hoses to the area that we are spraying. We start spraying when everyone is away from the spray area. Place must be vacant for 24 hours after spraying. If the wall is 4 inches thick close cell spray foam will meet R-24 code in Nova Scotia.

We Also Do Crawl Spaces Overhangs Basements That Are Not Gyprocked or Paneled
Rock Basement

How It’s Done:
Most jobs are one day, two guys. All our foam equipment is in a three ton box truck and is run by a John Deere generator. We run our hoses to the area that we are spraying. We start spraying when everyone is away from the spray area. Place must be vacant for 24 hours after spraying. Spray foam must be covered by gyprock or a fire barrier (Monkote)to meet code in Nova Scotia.

Insulation Information Chart

Join Our Newsletter